Thermage® FLX in Richmond, BC, near Vancouver
A monopolar radiofrequency device for non-invasive skin tightening
Thermage FLX is a radiofrequency treatment that heats the deeper, collagen-rich layers of the skin to tighten and smooth, without surgery. Typically one session is planned at our Richmond clinic, and many people resume normal activities the same day.
- 30 min–2 h
- Typical session, by area*
- Same day
- Return to normal activities*
- 2–6 months
- Gradual results build*
- 30 min–2 h
- Typical session, by area*
- Same day
- Return to normal activities*
- 2–6 months
- Gradual results build*
What is Thermage FLX, and how does it work?
Thermage FLX is a non-surgical radiofrequency treatment that tightens skin on the eyes, face, neck and body. A session typically takes about 30 minutes to 2 hours depending on the areas treated, and many people resume normal activities the same day; temporary redness or swelling is possible. How the cost is set is explained in the FAQ below.
RAAC uses Thermage FLX to reach deep structural layers of the skin (up to 4.3mm with the Body Tip) and tighten without incisions, with the focus on precision and medical safety. *Individual results vary.
Deep penetration
Targets structural layers (up to 4.3mm with Body Tip) for meaningful tightening.
AccuREP™ precision
Real-time calibration tailors each pulse to your skin’s impedance.
Comfort pulse cooling
Integrated cooling and vibration are designed to help manage the heat sensation during treatment.
Thermage FLX vs CPT: what changed?
FLX is the fifth generation of Thermage technology, following the earlier CPT handpieces.
Larger tip
A larger treatment tip is designed to cover areas more efficiently.
Pulse-by-pulse feedback
AccuREP™ checks your skin’s impedance to help keep each pulse consistent.
Comfort vibration
Multi-directional vibration plus cooling helps ease the heat sensation.
Controlled depth
Consistent RF delivery reaches the dermis for collagen remodeling while the surface is cooled.
Who is a candidate, and who is not?
Non-surgical tightening for early to moderate laxity across face, eyes, neck and body. Candidacy is confirmed at your physician assessment.
Great Fit If You
- +Have mild to moderate facial or neck skin laxity
- +Want to refine jawline definition or ease eyelid hooding
- +Prefer a non-surgical, needle-free tightening option
- +Seek smoother texture and smaller-looking pores
- +Want a tightening option with little downtime
Should not, or should wait
- –Are pregnant or breastfeeding
- –Have open wounds, active infection or inflammation at the site
- –Have a pacemaker, other implanted electronic device or metal implants in the treatment area
- –Recently had a thread lift or high-energy laser in the same area
- –Have extremely sensitive skin or neuropathic pain conditions
- –Have a medical condition or take medication that affects healing (share your full history)
Why have Thermage at RAAC?
Dr. Jiang advises whether Thermage, Ultherapy or both suit you. Here is how we approach Thermage.
Doctor-led dosing
Energy settings and vectors are chosen by the physician to tighten safely while protecting facial volume.
Genuine FLX tips
Genuine Solta FLX tips, unboxed in front of you and scannable to verify before treatment.
Eye-area protocols
Physician-led periorbital protocols aimed at eyelid hooding and laxity.
Combination planning
Thermage for tightening and Ultherapy for lifting can be staged together when full-face rejuvenation is wanted.
Treatable Areas
Thermage FLX covers delicate eyes through larger body zones with tip-specific settings.
Eyes (periorbital)
Physician-led eyelid treatment to ease the look of hooding and fine lines.
Face & jawline
Aims to soften folds, refine jawline definition and smooth texture.
Neck
Aims to address laxity and horizontal neck lines.
Abdomen
Targets skin laxity after pregnancy or weight change.
Arms
Targets upper-arm skin laxity.
Knees
Aims to smooth crepey skin above the knee.
Does Thermage hurt? Session length, recovery and aftercare
Most people feel brief heat pulses, eased by built-in cooling and vibration. Here is how a Thermage FLX visit runs, from comfort and session length to aftercare and results.
Pre-Care
Avoid sunburn or tanning before treatment
Pause chemical peels or strong exfoliants in the area
Tell us about recent injectables, laser treatments, medications and any implants
Arrive with clean skin, free of makeup or heavy skincare, and skip alcohol or spicy foods that day
Ask about comfort options; a numbing cream may be discussed for sensitive areas
During Treatment
Consult & mapping
Skin assessment and grid mapping tailored to your goals.
Prep & coupling
Cleanse skin and apply coupling fluid for even RF delivery.
FLX energy delivery
Controlled RF pulses with cooling and vibration. You may feel brief heat, and settings are adjusted to your feedback.
Soothe & instructions
A session typically takes about 30 minutes to 2 hours depending on the areas treated. Cooling, hydration and aftercare guidance follow.
Post-Care
Keep skin hydrated and wear broad-spectrum sunscreen daily
Avoid saunas, hot baths and intense workouts for 2–3 days
Use gentle skincare; avoid harsh scrubs or peels, and ask when you can resume makeup
Expect brief redness or swelling that settles quickly; some firmness may be noticed soon after, with the main change building over about 2–6 months
Results commonly last around one to two years; some people repeat treatment about once a year
**Individual results vary.
Common Questions
How long does a Thermage FLX session take?+
A session typically takes about 30 minutes to 2 hours, depending on the areas treated. The eye area or a single small area is shorter, while the face and neck together, or a body area, take longer. Your physician confirms the plan and expected time at your assessment.
Does Thermage FLX hurt, and what comfort measures are used?+
Most people feel brief heat pulses rather than constant pain. Cooling and vibration are built into the handpiece to ease the sensation, and energy is adjusted to your feedback throughout. A numbing cream may be discussed for sensitive areas. We talk through comfort options at your consultation.
When will I see Thermage results, and how long do they last?+
Some firmness may be noticed soon after treatment, while the main change builds gradually over about 2–6 months as collagen remodels. Results commonly last around one to two years, depending on your age, skin quality, sun protection and lifestyle. Individual results vary.
How many Thermage treatments do I need?+
Typically one session is planned per area, and some people have a second session depending on laxity and response. To sustain results, some people repeat treatment about once a year. Your physician sets a realistic plan with you at assessment.
Is there downtime, and what should I avoid afterwards?+
Many people resume normal activities the same day; temporary redness or swelling is possible. For 2–3 days avoid saunas, hot baths and intense workouts, and avoid harsh scrubs or peels. Wear sunscreen daily and keep skin hydrated. Ask your clinician when you can resume makeup.
What are the possible side effects of Thermage FLX?+
Common effects are temporary redness, swelling and tenderness. Rarely, blistering or changes in skin contour can occur. Treatment is not suitable for everyone, so your physician reviews your history and treatment area first and explains risks and aftercare before you decide.
Is Thermage FLX safe around the eyes?+
A smaller tip is designed for the eye area, and eyelid treatment is physician-led with eye-specific settings and protocols. Safety depends on your anatomy and history, so your physician examines the eye area and reviews your medical history at consultation before deciding whether to treat.
Is Thermage FLX suitable for darker skin tones?+
Radiofrequency energy is not absorbed by skin pigment in the way many light-based devices are, so it is often considered for a range of skin tones. Suitability still depends on your skin and history, and your physician confirms it at your consultation.
Will Thermage melt my facial fat?+
Radiofrequency acts on the skin's collagen rather than targeting fat, and settings and vectors are chosen to protect facial volume. Individual responses vary, which is why your physician assesses your face and plans energy levels before treatment.
Thermage FLX vs Ultherapy: which suits me, and can they be combined?+
Thermage uses radiofrequency to tighten and smooth the skin over broad areas; Ultherapy uses micro-focused ultrasound to reach deeper structural layers for lifting. They act at different depths, so some plans stage both, alongside injectables for volume or lines where appropriate. Dr. Jiang recommends the approach at assessment.
How is the cost of Thermage FLX set in Richmond, BC?+
Cost depends on the treatment area and tip used, since face, eye and body protocols differ. We do not publish a single fee. Dr. Jiang's team gives you a protocol plan and written quote at your consultation at our Richmond clinic.
Does RAAC serve Vancouver patients and offer Mandarin or Cantonese consultations?+
Yes. The Richmond clinic is about a 3-minute walk from Lansdowne Station on the Canada Line (building parking is via Ackroyd Road) and serves patients from Vancouver, Burnaby, Surrey and across Metro Vancouver. Consultations are available in English, Mandarin and Cantonese.
Concerns this treatment is used for
Each of these has its own page explaining the cause, the options, and what recovery looks like:
Plan Your Thermage FLX Treatment
Book a consultation with Dr. Charles Jiang to confirm candidacy and plan a FLX protocol tailored to your skin, under licensed physician oversight.
Also available in Burnaby (Metrotown) — SkinArtMD
